Product

MDQ-100A

1. The chip and the base plate are electrically insulated, 2500V AC voltage;

2. International standard packaging;

3. Vacuum + hydrogen charging protective welding technology;

4. Welded structure, excellent temperature characteristics and power cycle capability;

5. Easy to install, easy to use and maintain;

6. Small size and light weight;

7. The maximum operating junction temperature reaches 150℃;

8. The forward pressure drop is small.

Product Detail

product detail

Features

1. The chip and the base plate are electrically insulated, 2500V AC voltage;

2. International standard packaging;

3. Vacuum + hydrogen charging protective welding technology;

4. Welded structure, excellent temperature characteristics and power cycle capability;

5. Easy to install, easy to use and maintain;

6. Small size and light weight;

7. The maximum operating junction temperature reaches 150℃;

8. The forward pressure drop is small.

Model meaning

MDQ100-16	Model meaning
M?	Modules
D	Module type: D: normal rectifier, Z: fast rectifier, T: normal thyristor, K: fast thyristor, F: D and T, H: Z and K
Q	Q: Single phase S: ??Three phase
100	Rated current: 30A 40A 60A 100A 150A 200A 250A 300A 400A 500A
16	Rated voltage level (x100=VoRM or VRRM)

Technical parameters

name	model	DC transmission Output current	Single phase input Positive to flat average current	Case temperature	Repeat in reverse Peak current	Repeat in reverse Peak voltage	On-state peak voltage	On-state peak current	Maximum rated junction temperature	insulation Voltage	weight
single phase rectifier Bridge MDQ	Type	ID	IF(OFF)	TC	IRRM	VRRM	VTM	ITM	Tm	Everything	Weight
	Type	A	A	℃	V	mA	V	A	℃	V(AM)	g
	MDQ40A	40	20	100	8	600-2000	1.45	40	150	2500	150
	MDQ60A	60	30	100	8	600-2000	1.45	60	150	2500
	MDQ100A	100	50	100	10	600-2000	1.45	100	150	2500

Appearance and installation dimensions/wiring diagram

Product application

1. DC current of instruments and equipment; 2. Input rectified power supply of PWM inverter; 3. DC motor excitation power supply; 4. Input rectification of switching power supply; 5. Soft-start capacitor charging; 6. Electrical drag and auxiliary current; 7 , Inverter welding machine; 8. Current charging DC power supply.

illustrate:

a. Vdsm/Vrsm=Vdrm/Vrrm+200V;

b. Unless otherwise stated, Lgt, Vgt, Ih, Vtm, and Viso are debugging values ??under 25, and other parameters in the table are test values ??under Tvjm;

c. I²t=I²tsmTW/2, where TW: bottom width of sinusoidal half-wave current, at 50HZ frequency, I²t(10ms)=0.005I²tsm(A²S);

d. When used at a current of 60HZ, Itsm(8.3ms)=1.066(10ms),I²t(8.3ms)=0.943I²tsm(10ms)。

DH48S-1Z

DH48S-2Z

DH48S-S

MXR-1 D48□A

DH48S-2ZH

MXR-1 A48□A

MXR-1 V38□A

MXR-1 L38□A

MXR-1 U38□A

MXR-1 D22□D